Projecta Battery Charger 12v 6 Stage 2-21amp PC2100

Maximise battery life and performance

The Projecta PC2100 Pro-Charge 6-Stage Automatic Battery Charger is a fully automatic battery charger with 6 charge stages. Automatic charging protects your battery from being overcharged so you can leave the charger connected to the battery indefinitely. 6-stage charging is a sophisticated charging technique that gives your battery longer life and better performance compared to using traditional chargers. The PC1600 is suitable for most 12V automotive, marine and deep cycle batteries. They may also help restore drained and sulphated batteries.

Calcium Mode

Pro-Charge’s Calcium mode adjusts the charging profile to suit calcium batteries for complete and proper charging. This charge mode is best suited to Calcium batteries that have been deeply discharged and require an equalisation charge to restore a full electrolyte reading.

Rejuvenation Mode

Pro-Charge’s Rejuvenation mode can restore tired batteries by breaking down sulphation and revitalising the battery cells, increasing battery life and performance.

Swicth mode Technology

Using the latest technology in battery chargers, switchmode chargers convert 240V AC power to 12V DC power using electronic components unlike traditional battery chargers that rely on heavy transformers. This allows the charger to be lightweight and compact without sacrificing on performance.

Projecta PC2100 Pro-Charge 6-Stage Automatic Battery Charger Features:

6 Charge stages: Rejuvenation; Soft Start; Bulk; Absorption; Battery Test and Float
Calcium mode: adjusts the charging profile to suit calcium batteries
Rejuvenation mode: revitalises tired batteries, increasing battery life and performance
Adjustable charge rate: output can be adjusted to suit the size of the battery for optimum
Side mounting wings: optional mounting wings for permanent installation
Switchmode Technology: converts 240VAC power to 12VDC power
Safer charging: spark free and polarity protected

Projecta PC2100 Pro-Charge 6-Stage Automatic Battery Charger Specifications:

Part number: PC2100
Type: 6 Stage
Input (Nominal): 240VAC, 50Hz
Input Power: 600W
Output Voltage: 12V
Output Current: 2, 6, 12, 21A
Minimum Start Voltage: 3.0V
Back Drain: 1mA

Charge Control

Rejuvenation: High frequency charge for 24 hours
Soft Start: Half the rated set current up to 10.5V
Bulk: Set current up to: 14.4V (Normal), 14.7V (Calcium)
Absorption: Constant voltage 14.4V (NORMAL), 14.7V (Calcium) until current drops to the following set points – 2A-0.3A, 6A-0.9A, 12A-1.8A, 21A-3.1A
Equalisation (Calcium mode only): Constant current 2.0A up to 16V then hold for 30 min or 12 hour timeout
Analysis: Stops charging for 5 minutes, tests if battery is above 12.5V
Float: 13.7V

Battery Range

Deep Cycle: 14-420Ah
Automotive: 80-2500CCA
Marine: 110-3500MCA
Types of Batteries: Most types of batteries including GEL, AGM, WET CELL and Calcium
Size: 229 x 137 x 86 mm
Weight: 1.5kg